Digital Link DL3100 Guía de usuario Pagina 124
- Pagina / 166
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
7-12 DL3100 User’s Guide—November 1998
7
4. Press ENTR to activate edit mode.
The display starts to blink.
To take no action and move to the next item, press EXIT.
Press the up or down arrow to select either In Service or Out of
Service and press ENTR to conÞrm the option selected.
5. Use the same method to conÞgure the other parameters in the
HVDB Menu for this data port. Repeat for any other HVDB data
ports.
HVDB Config Menu Parameters
The following is a list of the HVDB ConÞg Menu parameters:
¥ DTE rate
Lets you select DTE rates in increments of 300 kbps ranging from 300
kbps to 44.2 Mbps. The maximum data rate recommended for V.35 is 4
Mbps.
¥ Service
Lets you place the HSDB In Service or Out of Service.
¥ CTS
Lets you assert Clear To Send (Assert CTS) so that it is always sent to
the DTE in response to an RTS.
¥TD
Lets you determine whether the transmit clock is to be received from
the DTE leads (SCTE) or from the DL3100 (SCT).
¥ Clock
Lets you set the TD clock to normal or inverted.
¥ Delete DTE
Prohibits the data board from recognizing the DTE.
For more information regarding these parameters, refer to ÒConÞguring
the HVDBÓ on page 4-25 in Chapter 4, ÒConÞguring the DL3100.Ó
Displaying Status and Statistics
You use the Display Menu to monitor network status, node status, and
network and HSDB/HVDB statistics.
- T3 Access 1
- Multiplexer 1
- User’s Guide 1
- (30) days after such claim 2
- Products Manufactured Under 3
- CertiÞed 3
- Quality Management System 3
- Customer Information 4
- Table of Contents 7
- Table of Contents ix 9
- Table of Contents xi 11
- Glossary G-1 12
- Index I-1 12
- List of Figures 13
- List of Figures xv 15
- List of Tables 17
- Audience 19
- Organization 19
- Conventions 20
- Typography 21
- Returning a Unit 22
- Send Us Your Comments 23
- DL3100 Quick ConÞguration 1 25
- Getting Started 26
- Unit Configuration 27
- T3MB Configuration 28
- Configuration Actions 29
- DTE Port Configuration 30
- About the DL3100 2 33
- DL3100 Features 34
- How the DL3100 Works 35
- Mechanically Installing the 37
- About Grounding 39
- INS ALM OFFYEL AIS BPVPAR 40
- Mid-mounting the DL3100 41
- EFS 00.0 PERCENT 43
- Figure 3-4 DL3100 Rear Panel 44
- ConÞguring the DL3100 4 47
- Comm Ports 48
- Configuring the DL3100 4-3 49
- Four units 154-00051-01 50
- Eight units 154-00052-01 50
- Twelve units 154-00053-01 50
- Logging on to the DL3100 51
- Using the Terminal Interface 52
- Selecting a Device 52
- What You’ll See on the Screen 53
- Configuring the DL3100 4-9 55
- Configuring the DL3100 56
- Configuring the DL3100 4-11 57
- Monitoring and 58
- Managing the DL3100.” 58
- Configuring the DL3100 4-13 59
- Login Configuration 60
- Login Configuration Parameters 61
- Configuring the T3MB 62
- Configuring the DL3100 4-17 63
- Configuring the T3MB TDL 65
- Configuring the DL3100 4-21 67
- Configuring the HSDB 68
- Configuring the DL3100 4-23 69
- Configuring the DL3100 4-27 73
- Monitoring and Managing the 75
- Remote Node Name 78
- Local Unit Node Number 78
- Remote Node 78
- Monitoring Alarms and Status 79
- Message Severity Description 81
- Monitoring Statistics 87
- T3MB Statistics Parameters 89
- Statistic Type Description 93
- Displaying the Event History 96
- Event History Menu Parameters 97
- Using the System Utilities 98
- Configuring the DL3100.” 98
- Downloading Software 99
- Backing Up the Database 101
- Database backed up to EEPROM 102
- Diagnosing and 103
- Troubleshooting the DL3100 103
- Running Diagnostic Tests 104
- Network Loopback 105
- DTE Loopback 106
- Send FEAC Code 106
- NET/DTE Loopback 107
- Running Network Tests 108
- Running HSDB/HVDB Tests 109
- Running a Lamp Test 109
- DL3100 Problems 110
- The Front Panel 113
- Front Panel Keys 114
- CONFIGURATION 114
- What You See 115
- Editing a Parameter 116
- 3100 _ _ _ _ _ _ _ _ _ _ _ _ 117
- NODE ID 117
- 3100_ _ _ _ _ _ _ _ _ _ _ _ 117
- Keeping a Record 118
- The Node Config Submenu 119
- Node Config Menu Parameters 120
- The Comm Port Parameters 120
- The T3 Net Config Menu 121
- Configuring the Data Ports 122
- Configuring the HVDB 123
- HVDB Config Menu Parameters 124
- Monitoring the Node Status 125
- Monitoring the Network Status 126
- Monitoring Network Statistics 126
- Clearing Network Statistics 128
- Figure 7-11 Statistics Menu 129
- Clearing HSDB/HVDB Statistics 130
- Starting and Ending a Test 131
- During a Test 132
- DL3100 Technical 133
- SpeciÞcations 133
- Data Interface 134
- Interface Connectors 134
- Communication Port (ASCII) 135
- Communication Port (SNMP) 135
- Diagnostics 136
- Mechanical 136
- Environmental 137
- Regulatory 137
- Downloadable Software 137
- Alarm Types 138
- Equipment Grounding Conductor 138
- RTS CTS DTR 139
- INS TEST TD RD TA CA 139
- RTS CTS DTR RTS CTS DTR 139
- TST DTE 139
- Factory Default Configuration 141
- 8, no parity, 2 stop bits 142
- Enabled 142
- Configuration Worksheet 143
- Normal User Password 144
- DL3100 Connector and Pin 145
- Assignments 145
- Glossary G 147
- Glossary G-3 149
- Glossary G-5 151
- See also 153
- Glossary G-9 155
- Glossary G-11 157
- Glossary G-13 159
- Index I-3 163
- Index I-5 165
Relacionado con productos y manuales para Redes Digital Link DL3100
Redes Digital Link DL3800 DS1 Guía de usuario
(142 paginas)
(142 paginas)
Redes Digital Link DL600E E1 Guía de usuario
(147 paginas)
(147 paginas)
Redes Digital Link DL600E E1 Guía de usuario
(140 paginas)
(140 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.053 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales