Digital Link DL600E E1 Guía de usuario descargar pdf (Pagina 40)

2-12 Solo E1 DSU User Guide—June 1998

A bare, covered or insulated grounding conductor is acceptable. A

conductor that is individually covered or insulated should have an outer

Þnish that has a green continuous outer Þnish, or green with one or more

yellow stripes.

Cable Connections

To connect the Solo E1 DSU (Figure 2-5):

1. Connect the DTE cable (refer to Table 2-7):

a. Connect the DTE cable to the Solo E1 DSU DB-25 socket

connector.

b. Connect the opposite end to the DTE equipment.

2. Choose your network connection, either (refer to Table 2-6):

Socket:

a. Connect the network cable to the Solo E1 DSU DA-15

socket connector.

b. Connect the opposite end to the NET equipment.

BNC:

a. Connect a coaxial cable from the Solo E1 DSU RX BNC to

your network TX connector.

b. Connect a coaxial cable from the Solo E1 DSU TX BNC to

your network RX connector.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 139 140

Sin comentarios

Digital Link DL600E E1 Guía de usuario Pagina 40